Home page

UCPA Series Pillow Block Bearing

Pillow block bearing, the most commonly used type of mounted units, are housings which have a bearing fitted into them. They are designed to provide shaft support where the mounting surface is parallel to the shaft axis. Typically manufactured from cast iron or cast steel, the pillow block bearing housing has provisions to allow the housing to be bolted down snugly.

Category：

Pillow Block Bearing

Key words：

Pillow Block Bearing

Email:

WhatsApp:

UCPA Series Pillow Block Bearing

Product Introduction:

Pillow block bearing, the most commonly used type of mounted units, are housings which have a bearing fitted into them.
They are designed to provide shaft support where the mounting surface is parallel to the shaft axis.
Typically manufactured from cast iron or cast steel, the pillow block bearing housing has provisions to allow the housing to be bolted down snugly.

Product parameter：

Unit No.	Dimensions(mm)									Tapped Holes(M)	Bearing No.	Housing No.	Mass(kg)
	d	H	L	J	A	H0	S	B	F
UCPA203	17	30.2	70	48	36	57	11.5	27.4	10	M8	UC203	PA203	0
UCPA204	20	30.2	76	52	40	62	12.7	31	13	M10	UC204	PA204	0.6
UCPA205	25	36.5	84	56	38	72	14.3	34	15	M10	UC205	PA205	0.8
UCPA206	30	42.9	94	66	48	84	15.9	38.1	18	M14	UC206	PA206	1.2
UCPA207	35	47.6	110	80	48	95	17.5	42.9	20	M14	UC207	PA207	1.7
UCPA208	40	49.2	116	84	54	100	19	49.2	20	M14	UC208	PA208	2
UCPA209	45	54.2	120	90	60	108	19	49.2	25	M14	UC209	PA209	2.2
UCPA210	50	57.2	130	94	60	116	19	51.6	25	M16	UC210	PA210	2.8
UCPA211	55	63.5	140	104	66	125	22.2	55.6	25	M16	UC211	PA211	3
UCPA212	60	69.9	150	114	68	138	25.4	65.1	25	M16	UC212	PA212	4.24
UCPA213	65	76.2	160	124	70	150	25.4	65.1	25	M16	UC213	PA213	0

Message